diff --git a/alphine b/alphine
index 3a27b7c..d9bf66b 100644
--- a/alphine
+++ b/alphine
@@ -130,3 +130,35 @@ if [ -z "$DISPLAY" ] && [ "$(tty)" = "/dev/tty1" ]; then
     exec labwc
 fi
 
+
+
+apk update
+apk upgrade
+
+setup-wayland-base
+
+apk add labwc labwc-doc \
+    dbus dbus-x11 \
+    foot \
+    rofi \
+    swaybg \
+    swayidle \
+    swaylock \
+    font-dejavu
+
+adduser ivan
+
+dbus-launch labwc
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/alpine_install.sh b/alpine_install.sh
index 86ce437..bf9701e 100644
--- a/alpine_install.sh
+++ b/alpine_install.sh
@@ -1,909 +1,528 @@
 #!/bin/sh
 
 # ============================================================
-# LabWC Alpine Setup Script
-# Version 11
-#
-# Запуск:
-#
-#   ./setup.sh
-#   ./setup.sh ivan
-#
-# Можно запускать от root ИЛИ обычного пользователя.
-#
-# Скрипт автоматически использует sudo.
-#
+# Alpine Linux + labwc Desktop Installer
+# Wayland / labwc / seatd / greetd / NetworkManager / PipeWire
 # ============================================================
 
-set -eu
+echo "=============================================="
+echo " Alpine Linux -> labwc Desktop"
+echo "=============================================="
+echo
 
-USER_NAME="${1:-ivan}"
-
-HOME_DIR="/home/$USER_NAME"
-PROFILE="$HOME_DIR/.profile"
-
-ZENITH_REPO="https://zenithcode.duckdns.org/s13bby/zenith-cli.git"
-ZENITH_DIR="$HOME_DIR/zenith-cli"
-LOCAL_BIN="$HOME_DIR/.local/bin"
-
-# ============================================================
-# Абсолютный путь к скрипту
-# ============================================================
-
-case "$0" in
-    /*)
-        SCRIPT_PATH="$0"
-        ;;
-    *)
-        SCRIPT_PATH="$(pwd)/$0"
-        ;;
-esac
-
-# ============================================================
-# Проверка имени
-# ============================================================
-
-case "$USER_NAME" in
-    ""|*[!a-zA-Z0-9_-]*)
-        echo "[!] Некорректное имя пользователя: $USER_NAME"
-        exit 1
-        ;;
-esac
-
-# ============================================================
-# Автоматический sudo
-# ============================================================
-
-if [ "$(id -u)" -ne 0 ]; then
-
-    echo
-    echo "=================================================="
-    echo "[*] Запущено от пользователя: $(id -un)"
-    echo "[*] Нужны root-права."
-    echo "=================================================="
-    echo
-
-    if ! command -v sudo >/dev/null 2>&1; then
-
-        echo "[!] sudo не установлен."
-        echo
-        echo "[!] Выполните один раз от root:"
-        echo
-        echo "    apk add sudo"
-        echo
-        exit 1
-
-    fi
-
-    exec sudo sh "$SCRIPT_PATH" "$@"
+# ------------------------------------------------------------
+# Check root
+# ------------------------------------------------------------
 
+if [ "$(id -u)" != "0" ]; then
+    echo "ERROR: run this script as root."
+    exit 1
 fi
 
-# ============================================================
-# Информация
-# ============================================================
-
-echo
-echo "=================================================="
-echo "       LabWC Alpine Setup Script v11"
-echo "=================================================="
-echo
-echo "[*] User:   $USER_NAME"
-echo "[*] Home:   $HOME_DIR"
-echo "[*] Alpine: $(cat /etc/alpine-release 2>/dev/null || echo unknown)"
-echo
-
-# ============================================================
-# Проверка Alpine
-# ============================================================
+# ------------------------------------------------------------
+# Check Alpine
+# ------------------------------------------------------------
 
 if [ ! -f /etc/alpine-release ]; then
-
-    echo "[!] Это не Alpine Linux."
+    echo "ERROR: this script is intended for Alpine Linux."
     exit 1
-
 fi
 
-# ============================================================
-# Проверка repositories
-# ============================================================
-
-if [ ! -f /etc/apk/repositories ]; then
-
-    echo "[!] /etc/apk/repositories отсутствует."
-    exit 1
-
-fi
-
-# ============================================================
-# Функции
-# ============================================================
-
-package_exists() {
-    PACKAGE="$1"
-
-    apk search -x "$PACKAGE" 2>/dev/null |
-        grep -Eq "^${PACKAGE}(-[0-9].*)?$"
-}
-
-
-install_required() {
-    PACKAGE="$1"
-
-    echo
-    echo "[*] Проверка обязательного пакета: $PACKAGE"
-
-    if apk info -e "$PACKAGE" >/dev/null 2>&1; then
-
-        echo "[+] $PACKAGE уже установлен."
-        return 0
-
-    fi
-
-    if ! package_exists "$PACKAGE"; then
-
-        echo
-        echo "=================================================="
-        echo "[!!!] ОШИБКА"
-        echo "=================================================="
-        echo
-        echo "[!] Обязательный пакет отсутствует:"
-        echo
-        echo "    $PACKAGE"
-        echo
-        echo "[!] Alpine:"
-        cat /etc/alpine-release
-        echo
-        echo "[!] Репозитории:"
-        cat /etc/apk/repositories
-        echo
-
-        exit 1
-
-    fi
-
-    apk add "$PACKAGE"
-}
-
-
-install_optional() {
-    PACKAGE="$1"
-
-    echo
-    echo "[*] Необязательный пакет: $PACKAGE"
-
-    if apk info -e "$PACKAGE" >/dev/null 2>&1; then
-
-        echo "[+] Уже установлен."
-        return 0
-
-    fi
-
-    if package_exists "$PACKAGE"; then
-
-        apk add "$PACKAGE"
-
-        echo "[+] Установлен."
-
-    else
-
-        echo "[!] Пакет отсутствует."
-        echo "[!] Пропускаем."
-
-    fi
-}
-
-
-add_user_group() {
-    GROUP_NAME="$1"
-
-    # Создаём группу, если её нет
-    if ! getent group "$GROUP_NAME" >/dev/null 2>&1; then
-
-        echo "[*] Создание группы $GROUP_NAME..."
-        addgroup "$GROUP_NAME"
-
-    fi
-
-    if id -nG "$USER_NAME" 2>/dev/null |
-        tr ' ' '\n' |
-        grep -qx "$GROUP_NAME"
-    then
-
-        echo "[+] $USER_NAME уже в группе $GROUP_NAME."
-
-    else
-
-        echo "[*] Добавление $USER_NAME в группу $GROUP_NAME..."
-
-        addgroup "$USER_NAME" "$GROUP_NAME"
-
-    fi
-}
-
-
-enable_service() {
-    SERVICE="$1"
-
-    echo
-    echo "[*] Служба: $SERVICE"
-
-    if ! command -v rc-service >/dev/null 2>&1; then
-
-        echo "[!] OpenRC недоступен."
-        return 0
-
-    fi
-
-    if rc-service "$SERVICE" status >/dev/null 2>&1; then
-
-        echo "[+] $SERVICE уже запущен."
-
-    else
-
-        echo "[*] Запуск $SERVICE..."
-
-        rc-service "$SERVICE" start 2>/dev/null || true
-
-    fi
-
-    rc-update add "$SERVICE" default 2>/dev/null || true
-}
-
-
-check_command() {
-    NAME="$1"
-    COMMAND="$2"
-
-    printf '%-25s' "$NAME:"
-
-    if command -v "$COMMAND" >/dev/null 2>&1; then
-        echo "OK"
-    else
-        echo "ERROR"
-    fi
-}
-
-# ============================================================
-# Community
-# ============================================================
+ALPINE_VERSION="$(cut -d'.' -f1,2 /etc/alpine-release)"
 
+echo "Alpine version: $ALPINE_VERSION"
 echo
-echo "=================================================="
-echo "[*] Репозиторий community"
-echo "=================================================="
 
-if grep -qE '^[[:space:]]*[^#[:space:]].*/community/?[[:space:]]*$' \
-    /etc/apk/repositories
-then
+# ------------------------------------------------------------
+# Repositories
+# ------------------------------------------------------------
 
-    echo "[+] community уже включён."
+echo "➜ Configure Alpine repositories"
 
-elif grep -qE '^[[:space:]]*#.*\/community/?[[:space:]]*$' \
-    /etc/apk/repositories
-then
-
-    echo "[*] Раскомментирование community..."
-
-    sed -i \
-        's|^[[:space:]]*#\(.*\/community/?[[:space:]]*\)$|\1|' \
-        /etc/apk/repositories
-
-else
-
-    echo "[!] community не найден."
-    echo
-    cat /etc/apk/repositories
-    echo
-
-    exit 1
-
-fi
-
-# ============================================================
-# APK update
-# ============================================================
-
-echo
-echo "[*] apk update..."
+cat > /etc/apk/repositories << EOF
+https://dl-cdn.alpinelinux.org/alpine/v${ALPINE_VERSION}/main
+https://dl-cdn.alpinelinux.org/alpine/v${ALPINE_VERSION}/community
+EOF
 
 apk update
 
-# ============================================================
-# Пользователь
-# ============================================================
+# ------------------------------------------------------------
+# Desktop user
+# ------------------------------------------------------------
 
-echo
-echo "=================================================="
-echo "[*] Пользователь"
-echo "=================================================="
+USER="user"
 
-if id "$USER_NAME" >/dev/null 2>&1; then
-
-    echo "[+] $USER_NAME уже существует."
-
-else
-
-    echo "[*] Создание $USER_NAME..."
-
-    adduser -D "$USER_NAME"
-
-    echo
-    echo "[!] Задайте пароль для $USER_NAME вручную:"
-    echo "    passwd $USER_NAME"
-    echo
+echo "➜ Create desktop user: $USER"
 
+if ! id "$USER" >/dev/null 2>&1; then
+    adduser -D "$USER"
 fi
 
-# ============================================================
-# Базовые пакеты
-# ============================================================
+# sudo
+apk add sudo
 
-echo
-echo "=================================================="
-echo "[*] Базовые пакеты"
-echo "=================================================="
-
-install_required sudo
-install_required nano
-install_required git
-install_required bash
-install_required build-base
-
-# ============================================================
-# Sudo
-# ============================================================
-
-echo
-echo "=================================================="
-echo "[*] Настройка sudo"
-echo "=================================================="
-
-if [ -d /etc/sudoers.d ]; then
-
-    cat > /etc/sudoers.d/wheel << 'EOF'
-%wheel ALL=(ALL) ALL
+cat > "/etc/sudoers.d/$USER" << EOF
+$USER ALL=(ALL) NOPASSWD: ALL
 EOF
 
-    chmod 440 /etc/sudoers.d/wheel
+chmod 0440 "/etc/sudoers.d/$USER"
 
-else
+echo "✓ User $USER created"
+echo
 
-    if ! grep -qE '^%wheel[[:space:]]+ALL=\(ALL\)[[:space:]]+ALL' \
-        /etc/sudoers
-    then
+# ------------------------------------------------------------
+# Basic desktop infrastructure
+# ------------------------------------------------------------
 
-        echo '%wheel ALL=(ALL) ALL' >> /etc/sudoers
+echo "➜ Install desktop infrastructure"
 
+apk add \
+    dbus \
+    dbus-x11 \
+    eudev \
+    seatd \
+    seatd-openrc \
+    polkit \
+    polkit-elogind \
+    font-dejavu \
+    font-noto \
+    font-noto-cjk
+
+# ------------------------------------------------------------
+# User groups
+# ------------------------------------------------------------
+
+echo "➜ Configure user groups"
+
+addgroup "$USER" seat 2>/dev/null || true
+addgroup "$USER" audio 2>/dev/null || true
+addgroup "$USER" video 2>/dev/null || true
+addgroup "$USER" input 2>/dev/null || true
+
+# ------------------------------------------------------------
+# Wayland / labwc
+# ------------------------------------------------------------
+
+echo "★ Install labwc"
+
+apk add \
+    labwc \
+    xwayland
+
+# ------------------------------------------------------------
+# Useful Wayland desktop applications
+# ------------------------------------------------------------
+
+echo "➜ Install Wayland utilities"
+
+apk add \
+    foot \
+    rofi \
+    swaybg \
+    swayidle \
+    swaylock \
+    waybar \
+    wl-clipboard \
+    grim \
+    slurp
+
+# ------------------------------------------------------------
+# File manager / removable devices
+# ------------------------------------------------------------
+
+echo "➜ Install filesystem / removable device support"
+
+apk add \
+    gvfs \
+    gvfs-fuse \
+    gvfs-smb \
+    udisks2 \
+    udisks2-openrc \
+    fuse-openrc
+
+# ------------------------------------------------------------
+# NetworkManager
+# ------------------------------------------------------------
+
+echo "➜ Install NetworkManager"
+
+apk add \
+    networkmanager \
+    networkmanager-openrc \
+    networkmanager-tui
+
+rc-update add networkmanager default
+
+# ------------------------------------------------------------
+# Seat management
+# ------------------------------------------------------------
+
+echo "➜ Configure seatd"
+
+rc-update add seatd default
+
+# ------------------------------------------------------------
+# D-Bus
+# ------------------------------------------------------------
+
+echo "➜ Configure D-Bus"
+
+rc-update add dbus default
+
+# ------------------------------------------------------------
+# PipeWire
+# ------------------------------------------------------------
+
+echo "★ Install PipeWire audio"
+
+apk add \
+    pipewire \
+    pipewire-pulse \
+    pipewire-alsa \
+    pipewire-tools \
+    pipewire-spa-bluez \
+    pipewire-pulse-openrc \
+    wireplumber \
+    wireplumber-openrc
+
+# ------------------------------------------------------------
+# ALSA
+# ------------------------------------------------------------
+
+echo "➜ Install ALSA utilities"
+
+apk add \
+    alsa-utils \
+    alsaconf \
+    alsa-lib
+
+addgroup "$USER" audio 2>/dev/null || true
+
+# ------------------------------------------------------------
+# Bluetooth
+# ------------------------------------------------------------
+
+echo "➜ Install Bluetooth support"
+
+apk add \
+    bluez \
+    bluez-openrc \
+    blueman
+
+rc-update add bluetooth default
+
+# ------------------------------------------------------------
+# Login manager
+# ------------------------------------------------------------
+
+echo "★ Install greetd"
+
+apk add \
+    greetd \
+    greetd-openrc \
+    greetd-agreety
+
+# ------------------------------------------------------------
+# greetd configuration
+# ------------------------------------------------------------
+
+echo "➜ Configure greetd"
+
+mkdir -p /etc/greetd
+
+cat > /etc/greetd/config.toml << EOF
+[terminal]
+vt = 7
+
+[default_session]
+command = "agreety --cmd labwc"
+user = "greetd"
+EOF
+
+# greetd needs access to seatd
+addgroup greetd seat 2>/dev/null || true
+
+# Make greetd wait for seatd
+if [ -f /etc/conf.d/greetd ]; then
+    if ! grep -q '^rc_need=".*seatd' /etc/conf.d/greetd 2>/dev/null; then
+        echo 'rc_need="seatd"' >> /etc/conf.d/greetd
     fi
-
 fi
 
-# ============================================================
-# Группы
-# ============================================================
-
-echo
-echo "=================================================="
-echo "[*] Группы"
-echo "=================================================="
-
-add_user_group wheel
+rc-update add greetd default
 
 # ------------------------------------------------------------
-# seat
-#
-# ВАЖНО:
-# seatd — имя программы/демона.
-# seat  — группа.
-#
-# НЕ добавляем пользователя в группу "seatd".
+# XDG user directories
 # ------------------------------------------------------------
 
-if ! getent group seat >/dev/null 2>&1; then
+echo "➜ Create XDG user directories"
 
-    echo "[*] Группа seat отсутствует."
-    echo "[*] Создание группы seat..."
+apk add xdg-user-dirs
 
-    addgroup seat
-
-fi
-
-add_user_group seat
-
-# ============================================================
-# Wayland / graphics
-# ============================================================
-
-echo
-echo "=================================================="
-echo "[*] Wayland / graphics"
-echo "=================================================="
-
-# НЕ используем mesa-dri.
-install_required mesa
-install_required libinput
-install_required seatd
-install_required dbus
-install_required polkit
-
-# ============================================================
-# zenith-cli dependencies
-# ============================================================
-
-echo
-echo "=================================================="
-echo "[*] zenith-cli dependencies"
-echo "=================================================="
-
-install_required cmake
-install_required curl-dev
-install_required opencv-dev
-
-# ============================================================
-# Desktop
-# ============================================================
-
-echo
-echo "=================================================="
-echo "[*] Desktop"
-echo "=================================================="
-
-install_required labwc
-install_required alacritty
-install_required waybar
-install_required mako
-install_required swaybg
-install_required wofi
-install_required font-noto
-install_required font-dejavu
-install_required wl-clipboard
-install_required xdg-desktop-portal
-install_required pipewire
-install_required wireplumber
-install_required alsa-utils
-install_required networkmanager
-install_required pcmanfm
-install_required firefox
-install_required swaylock
-
-# ============================================================
-# SDDM (Display Manager)
-# ============================================================
-
-echo
-echo "=================================================="
-echo "[*] SDDM"
-echo "=================================================="
-
-install_required sddm
-
-# ============================================================
-# Необязательные пакеты
-# ============================================================
-
-echo
-echo "=================================================="
-echo "[*] Необязательные пакеты"
-echo "=================================================="
-
-# GTK portal может отсутствовать в некоторых конфигурациях.
-install_optional xdg-desktop-portal-gtk
-
-# network-manager-applet может отсутствовать в текущей ветке.
-#
-# Он НЕ нужен для работы NetworkManager.
-# Поэтому не ломаем установку из-за него.
-install_optional network-manager-applet
-
-# ============================================================
-# OpenRC
-# ============================================================
-
-echo
-echo "=================================================="
-echo "[*] OpenRC"
-echo "=================================================="
-
-enable_service seatd
-enable_service dbus
-enable_service networkmanager
-enable_service sddm
-
-# ============================================================
-# LabWC configuration
-# ============================================================
-
-echo
-echo "=================================================="
-echo "[*] Конфигурация LabWC"
-echo "=================================================="
-
-mkdir -p "$HOME_DIR/.config/labwc"
+su - "$USER" -c "xdg-user-dirs-update" 2>/dev/null || true
 
 # ------------------------------------------------------------
-# environment
+# labwc configuration
 # ------------------------------------------------------------
 
-cat > "$HOME_DIR/.config/labwc/environment" << 'EOF'
-XDG_CURRENT_DESKTOP=labwc
-XDG_SESSION_DESKTOP=labwc
-XDG_SESSION_TYPE=wayland
+echo "➜ Create labwc configuration"
 
-MOZ_ENABLE_WAYLAND=1
-QT_QPA_PLATFORM=wayland
-SDL_VIDEODRIVER=wayland
+mkdir -p "/home/$USER/.config/labwc"
 
-LIBSEAT_BACKEND=seatd
-EOF
-
-# ------------------------------------------------------------
-# autostart
-# ------------------------------------------------------------
-
-cat > "$HOME_DIR/.config/labwc/autostart" << 'EOF'
+cat > "/home/$USER/.config/labwc/autostart" << 'EOF'
 #!/bin/sh
 
-# ============================================================
-# Runtime directory
-# ============================================================
-
-if [ -z "${XDG_RUNTIME_DIR:-}" ]; then
-    export XDG_RUNTIME_DIR="/tmp/user-$(id -u)"
+# D-Bus user session
+if command -v dbus-update-activation-environment >/dev/null 2>&1; then
+    dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP
 fi
 
-if [ ! -d "$XDG_RUNTIME_DIR" ]; then
-    mkdir -p "$XDG_RUNTIME_DIR"
-    chmod 700 "$XDG_RUNTIME_DIR"
+# Wallpaper
+if command -v swaybg >/dev/null 2>&1; then
+    swaybg -c 202020 &
 fi
 
-# ============================================================
-# NetworkManager applet
-#
-# Запускаем ТОЛЬКО если он реально установлен.
-# ============================================================
-
-if command -v nm-applet >/dev/null 2>&1; then
-    nm-applet &
-fi
-
-# ============================================================
-# Waybar
-# ============================================================
-
+# Panel
 if command -v waybar >/dev/null 2>&1; then
     waybar &
 fi
 
-# ============================================================
-# Mako
-# ============================================================
-
-if command -v mako >/dev/null 2>&1; then
-    mako &
-fi
-
-# ============================================================
-# PipeWire
-# ============================================================
-
-if command -v pipewire >/dev/null 2>&1; then
-
-    if ! pgrep -x pipewire >/dev/null 2>&1; then
-        pipewire &
-    fi
-
-fi
-
-# ============================================================
-# WirePlumber
-# ============================================================
-
-if command -v wireplumber >/dev/null 2>&1; then
-
-    if ! pgrep -x wireplumber >/dev/null 2>&1; then
-        wireplumber &
-    fi
-
-fi
-EOF
-
-chmod +x "$HOME_DIR/.config/labwc/autostart"
-
-# ============================================================
-# zenith-cli
-# ============================================================
-
-echo
-echo "=================================================="
-echo "[*] zenith-cli"
-echo "=================================================="
-
-if [ -d "$ZENITH_DIR/.git" ]; then
-
-    echo "[+] Репозиторий уже существует."
-
-    su - "$USER_NAME" -c "
-        set -eu
-        cd '$ZENITH_DIR'
-        git pull
-    "
-
-else
-
-    echo "[*] Клонирование..."
-
-    su - "$USER_NAME" -c "
-        set -eu
-        git clone '$ZENITH_REPO' '$ZENITH_DIR'
-    "
-
-fi
-
-# ============================================================
-# Проверка исходников
-# ============================================================
-
-if [ ! -f "$ZENITH_DIR/build.sh" ]; then
-
-    echo
-    echo "[!] build.sh не найден:"
-    echo "    $ZENITH_DIR/build.sh"
-    exit 1
-
-fi
-
-if [ ! -f "$ZENITH_DIR/CMakeLists.txt" ]; then
-
-    echo
-    echo "[!] CMakeLists.txt не найден:"
-    echo "    $ZENITH_DIR/CMakeLists.txt"
-    exit 1
-
-fi
-
-# ============================================================
-# Сборка
-# ============================================================
-
-echo
-echo "=================================================="
-echo "[*] Сборка zenith-cli"
-echo "=================================================="
-
-su - "$USER_NAME" -c "
-    set -eu
-
-    cd '$ZENITH_DIR'
-
-    chmod +x build.sh
-
-    ./build.sh
-
-    if [ ! -f ./zenith-cli ]; then
-
-        echo '[!] zenith-cli не найден после сборки.'
-
-        exit 1
-
-    fi
-
-    chmod +x ./zenith-cli
-
-    mkdir -p '$LOCAL_BIN'
-
-    cp ./zenith-cli '$LOCAL_BIN/zenith-cli'
-
-    chmod +x '$LOCAL_BIN/zenith-cli'
-
-    echo '[+] zenith-cli установлен.'
-"
-
-# ============================================================
-# PATH
-# ============================================================
-
-echo
-echo "=================================================="
-echo "[*] PATH"
-echo "=================================================="
-
-touch "$PROFILE"
-
-if ! grep -qF 'export PATH="$HOME/.local/bin:$PATH"' "$PROFILE"; then
-
-    cat >> "$PROFILE" << 'EOF'
-
-# User local binaries
-export PATH="$HOME/.local/bin:$PATH"
-EOF
-
-fi
-
-# ============================================================
-# XDG_RUNTIME_DIR
-# ============================================================
-
-if ! grep -qF '# XDG-RUNTIME-DIR' "$PROFILE"; then
-
-    cat >> "$PROFILE" << 'EOF'
-
-# XDG-RUNTIME-DIR
-
-if [ -z "${XDG_RUNTIME_DIR:-}" ]; then
-    export XDG_RUNTIME_DIR="/tmp/user-$(id -u)"
-fi
-
-if [ ! -d "$XDG_RUNTIME_DIR" ]; then
-    mkdir -p "$XDG_RUNTIME_DIR"
-    chmod 700 "$XDG_RUNTIME_DIR"
-fi
-EOF
-
-fi
-
-# ============================================================
-# SDDM configuration
-# ============================================================
-
-echo
-echo "=================================================="
-echo "[*] Настройка SDDM"
-echo "=================================================="
-
-mkdir -p /etc/sddm.conf.d
-
-cat > /etc/sddm.conf.d/wayland.conf << 'EOF'
-[Wayland]
-Compositor=labwc
-
-[General]
-GreeterEnvironment=MOZ_ENABLE_WAYLAND=1,QT_QPA_PLATFORM=wayland,SDL_VIDEODRIVER=wayland
-EOF
-
-echo "[+] SDDM настроен для использования LabWC."
-
-# ============================================================
-# Права
-# ============================================================
-
-echo
-echo "=================================================="
-echo "[*] Права"
-echo "=================================================="
-
-if [ -d "$HOME_DIR/.config" ]; then
-
-    chown -R "$USER_NAME:$USER_NAME" \
-        "$HOME_DIR/.config"
-
-fi
-
-if [ -f "$PROFILE" ]; then
-
-    chown "$USER_NAME:$USER_NAME" \
-        "$PROFILE"
-
-fi
-
-if [ -d "$HOME_DIR/.local" ]; then
-
-    chown -R "$USER_NAME:$USER_NAME" \
-        "$HOME_DIR/.local"
-
-fi
-
-if [ -d "$ZENITH_DIR" ]; then
-
-    chown -R "$USER_NAME:$USER_NAME" \
-        "$ZENITH_DIR"
-
-fi
-
-# ============================================================
-# Финальная проверка
-# ============================================================
-
-echo
-echo "=================================================="
-echo "             ФИНАЛЬНАЯ ПРОВЕРКА"
-echo "=================================================="
-echo
-
-echo "[*] Пользователь:"
-id "$USER_NAME"
-
-echo
-
-printf '%-25s' "wheel:"
-if id -nG "$USER_NAME" |
-    tr ' ' '\n' |
-    grep -qx wheel
-then
-    echo "OK"
-else
-    echo "ERROR"
-fi
-
-printf '%-25s' "seat:"
-if id -nG "$USER_NAME" |
-    tr ' ' '\n' |
-    grep -qx seat
-then
-    echo "OK"
-else
-    echo "ERROR"
-fi
-
-echo
-
-check_command "seatd" "seatd"
-check_command "LabWC" "labwc"
-check_command "Waybar" "waybar"
-check_command "PipeWire" "pipewire"
-check_command "WirePlumber" "wireplumber"
-check_command "NetworkManager" "nmcli"
-check_command "D-Bus" "dbus-run-session"
-check_command "Bash" "bash"
-check_command "CMake" "cmake"
-check_command "SDDM" "sddm"
-
-echo
-
-printf '%-25s' "OpenCV:"
-if apk info -e opencv-dev >/dev/null 2>&1; then
-    echo "OK"
-else
-    echo "ERROR"
-fi
-
-printf '%-25s' "nm-applet:"
+# NetworkManager tray
 if command -v nm-applet >/dev/null 2>&1; then
-    echo "OK"
-else
-    echo "OPTIONAL / SKIPPED"
+    nm-applet &
 fi
 
-printf '%-25s' "zenith-cli:"
-if [ -x "$LOCAL_BIN/zenith-cli" ]; then
-    echo "OK"
-else
-    echo "ERROR"
+# Bluetooth tray
+if command -v blueman-applet >/dev/null 2>&1; then
+    blueman-applet &
 fi
+EOF
+
+chmod +x "/home/$USER/.config/labwc/autostart"
+
+# ------------------------------------------------------------
+# Basic labwc menu
+# ------------------------------------------------------------
+
+cat > "/home/$USER/.config/labwc/menu.xml" << 'EOF'
+<?xml version="1.0" encoding="UTF-8"?>
+
+<openbox_menu>
+    <menu id="root-menu" label="labwc">
+        <item label="Terminal">
+            <action name="Execute">
+                <command>foot</command>
+            </action>
+        </item>
+
+        <item label="Application launcher">
+            <action name="Execute">
+                <command>rofi -show drun</command>
+            </action>
+        </item>
+
+        <separator />
+
+        <item label="Reload labwc">
+            <action name="Reconfigure"/>
+        </item>
+
+        <item label="Exit">
+            <action name="Exit"/>
+        </item>
+    </menu>
+</openbox_menu>
+EOF
+
+# ------------------------------------------------------------
+# Basic keyboard shortcuts
+# ------------------------------------------------------------
+
+cat > "/home/$USER/.config/labwc/rc.xml" << 'EOF'
+<?xml version="1.0" encoding="UTF-8"?>
+
+<labwc_config>
+
+    <keyboard>
+        <default />
+
+        <keybind key="W-Return">
+            <action name="Execute">
+                <command>foot</command>
+            </action>
+        </keybind>
+
+        <keybind key="W-d">
+            <action name="Execute">
+                <command>rofi -show drun</command>
+            </action>
+        </keybind>
+
+        <keybind key="W-l">
+            <action name="Execute">
+                <command>swaylock</command>
+            </action>
+        </keybind>
+
+        <keybind key="W-q">
+            <action name="Close"/>
+        </keybind>
+
+    </keyboard>
+
+</labwc_config>
+EOF
+
+# ------------------------------------------------------------
+# Waybar configuration
+# ------------------------------------------------------------
+
+mkdir -p "/home/$USER/.config/waybar"
+
+cat > "/home/$USER/.config/waybar/config" << 'EOF'
+[
+    {
+        "layer": "top",
+        "position": "top",
+        "modules-left": [
+            "wlr/workspaces"
+        ],
+        "modules-center": [
+            "clock"
+        ],
+        "modules-right": [
+            "network",
+            "pulseaudio",
+            "battery"
+        ]
+    }
+]
+EOF
+
+cat > "/home/$USER/.config/waybar/style.css" << 'EOF'
+* {
+    border: none;
+    border-radius: 0;
+    font-family: sans-serif;
+    font-size: 13px;
+}
+
+window#waybar {
+    background: rgba(30, 30, 30, 0.95);
+    color: #ffffff;
+}
+
+#workspaces button {
+    padding: 0 8px;
+    color: #aaaaaa;
+}
+
+#workspaces button.active {
+    color: #ffffff;
+    background: #444444;
+}
+
+#clock,
+#network,
+#pulseaudio,
+#battery {
+    padding: 0 10px;
+}
+EOF
+
+# ------------------------------------------------------------
+# Permissions
+# ------------------------------------------------------------
+
+echo "➜ Fix user permissions"
+
+chown -R "$USER:$USER" "/home/$USER/.config"
+
+# ------------------------------------------------------------
+# Useful software
+# ------------------------------------------------------------
+
+echo "★ Install basic software"
+
+apk add \
+    htop \
+    neofetch \
+    curl \
+    wget \
+    git \
+    nano \
+    less \
+    file \
+    unzip \
+    zip
+
+# ------------------------------------------------------------
+# Optional browser
+# ------------------------------------------------------------
+
+# Uncomment if required:
+#
+# apk add firefox
+#
+# or:
+#
+# apk add chromium
+
+# ------------------------------------------------------------
+# Enable services
+# ------------------------------------------------------------
+
+echo "➜ Enable desktop services"
+
+rc-update add dbus default
+rc-update add seatd default
+rc-update add networkmanager default
+rc-update add bluetooth default
+rc-update add greetd default
+
+# ------------------------------------------------------------
+# Start services when possible
+# ------------------------------------------------------------
+
+echo "➜ Start services"
+
+rc-service dbus start 2>/dev/null || true
+rc-service seatd start 2>/dev/null || true
+rc-service networkmanager start 2>/dev/null || true
+rc-service bluetooth start 2>/dev/null || true
+
+# Do NOT start greetd here.
+# It will start automatically after reboot.
+
+# ------------------------------------------------------------
+# Final information
+# ------------------------------------------------------------
 
 echo
-echo "=================================================="
-echo "             УСТАНОВКА ЗАВЕРШЕНА"
-echo "=================================================="
+echo "=============================================="
+echo " ★★★ Alpine + labwc installation complete ★★★"
+echo "=============================================="
 echo
-echo "[+] Пользователь: $USER_NAME"
-echo "[+] LabWC установлен."
-echo "[+] NetworkManager установлен."
-echo "[+] seatd установлен."
-echo "[+] PipeWire установлен."
-echo "[+] SDDM установлен."
-echo "[+] zenith-cli установлен."
+echo "Desktop user: $USER"
 echo
-echo "[!] network-manager-applet не является обязательным."
-echo "[!] Если его нет — NetworkManager всё равно работает."
+echo "IMPORTANT:"
 echo
-echo "[!] Перезагрузка:"
+echo "Set a password for the desktop user:"
+echo
+echo "    passwd $USER"
+echo
+echo "Then reboot:"
 echo
 echo "    reboot"
 echo
-echo "После перезагрузки:"
+echo "After reboot:"
 echo
-echo "  1. SDDM запустится автоматически"
-echo "  2. Выберите пользователя: $USER_NAME"
-echo "  3. Введите пароль"
-echo "  4. Сессия LabWC (Wayland) запустится"
-echo "  5. Waybar"
-echo "  6. Mako"
-echo "  7. PipeWire / WirePlumber"
-echo "  8. NetworkManager"
+echo "    greetd -> labwc"
 echo
-echo "zenith-cli:"
+echo "Wayland compositor : labwc"
+echo "Seat manager       : seatd"
+echo "Login manager      : greetd"
+echo "Audio              : PipeWire + WirePlumber"
+echo "Network             : NetworkManager"
 echo
-echo "    zenith-cli"
-echo
-echo "=================================================="
\ No newline at end of file
+echo "=============================================="
\ No newline at end of file